✉ [email protected]
Accredited Certification Body · IAS & IAF Member · Certificates Verifiable Online
Home›Industries›Defence Industry

Get Your Defence Industry Certification Quote

Takes 30 seconds · a specialist responds within 2 business hours
Step 1 of 2
CertificationTrainingCompliance Audits
Not sure - guide me
No spam. No obligation. A clear quote.
15,000+Certified Clients
30+Countries Served
IAS · IAFAccredited
Defence Industry · ISO Certification

Defence supply chains run on proof, not promises

Programme offices and prime contractors do not take a supplier’s word for anything. They want the audited system behind the drawing: how a deviation is recorded, who can open the controlled file, what happens when a single-source component stops arriving. Certification answers that before the question is asked.

You need certification if…

  • !Tender documents list a certified quality management system as a pass-or-fail item before technical evaluation even begins.
  • !A prime contractor has issued a supplier development notice and wants closed corrective actions inside the quarter.
  • !Controlled drawings and weapon system code now sit on your network, and the customer wants to see access records.
  • !Bidding abroad for the first time, with agents and offset partners in countries nobody in the office has audited.
  • !Export control paperwork, industrial security rules and offset obligations are tracked by three people in three separate spreadsheets.
  • !Explosive licence renewal, a live-fire test programme or a new fabrication bay has put safety governance under review.
15Certifications apply

What an auditor actually walks into

An auditor walks the machining bays, the bonded store, the test range and the server room, then follows one serial number from raw material to despatch.

Programme schedule slipCounterfeit part ingressControlled data exposureDebarment from bidding
11Management system
3IT & cyber
1Product, regulatory & compliance audit

How Certification Works - 4 Steps

No black box. A defined, time-bound route from first call to certificate in hand.

Application & Proposal

Tell us the sites, the product families, whether propellants or explosives are handled, and which contracts drive the scope. Constraints on auditor access inside restricted areas are agreed here.

1–2 days

Gap Review & Readiness

A drawing goes to revision C, the subcontractor keeps building to revision B, and nobody finds out until first-article inspection. Configuration control is where the fortnight goes.

1–2 weeks

Stage 1 + Stage 2 Audit

Stage 1 tests documentation and readiness. Stage 2 goes to the floor: first-article inspection files, calibration status, permit-to-work on hot operations, access logs, and one non-conformance followed end to end.

Scheduled around operations

Certificate Issued

The certificate is issued under IAS accreditation and carries the IAF-recognised mark that a programme office or foreign buyer checks when verifying a supplier ahead of contract award.

Valid 3 years
Most defence suppliers complete the cycle in six to ten weeks. Name the bid date at application; it decides which audit slot you are offered, and the rest follows from site count and access formalities.

Certifications Applicable to the Defence Industry

Each one maps to a real requirement or risk in this sector.

Management System

11
ISO 9001
Quality Management System
Management SystemOpen full page →
Why it applies hereDefence contracts are awarded on demonstrated process control, not price alone. ISO 9001 gives the documented design, production and inspection controls that defence ministries, state procurement agencies and prime contractors expect at tender pre-qualification, and forms the base layer on which AS9100 and defence-specific quality requirements are built. It also standardises non-conformance and corrective action reporting across long production runs where a single deviation can halt a programme.Typical trigger: Tender pre-qualification; prime contractor onboarding
ISO 14001
Environmental Management System
Management SystemOpen full page →
Why it applies hereOrdnance plants, shipyards and munitions lines handle solvents, propellants and heavy metals under strict discharge limits. ISO 14001 provides the aspect-impact register, legal obligation tracking and emergency preparedness controls regulators look for. It increasingly appears in defence offset and export contracts where the buyer country audits environmental performance across the supply chain.Typical trigger: Pollution board consents; offset obligations
ISO 45001
Occupational Health & Safety
Management SystemOpen full page →
Why it applies hereDefence manufacturing combines explosives handling, heavy fabrication, live-fire testing and confined-space work. ISO 45001 formalises hazard identification, permit-to-work and incident investigation across these operations and gives the board documented evidence of due diligence. Prime contractors routinely make it a condition of subcontracting, and OH&S performance is now a scored criterion in many defence tenders.Typical trigger: Prime contractor mandate; insurance
ISO/IEC 27001
Information Security Management
Management SystemOpen full page →
Why it applies hereDefence work means classified drawings, weapon system code and personnel data sitting on contractor networks. ISO/IEC 27001 provides the access control, cryptography, supplier security and incident response framework required before facility security clearance is granted. Domestically it aligns with national industrial security expectations; for exporters it is the common language buyers use to judge whether a vendor can hold controlled information.Typical trigger: Facility security clearance; export contracts
ISO/IEC 27701
Privacy Information Management
Management SystemOpen full page →
Why it applies hereDefence organisations hold service records, biometric data, medical files and vendor personnel information. ISO/IEC 27701 extends an existing ISMS into a privacy management system, mapping controls to the data protection law of each jurisdiction you operate in for personnel and veteran data. It matters most for contractors running payroll, recruitment, health or welfare systems on behalf of armed forces clients.Typical trigger: Personnel and welfare systems
ISO/IEC 20000-1
IT Service Management
Management SystemOpen full page →
Why it applies hereDefence networks, simulators and command support systems are increasingly run under long-term managed service contracts. ISO/IEC 20000-1 evidences the incident, change, capacity and service continuity disciplines needed to hold agreed availability on mission-critical systems, and gives the customer a contractual measure of service performance beyond an uptime percentage.Typical trigger: Managed service and AMC contracts
ISO 22301
Business Continuity Management
Management SystemOpen full page →
Why it applies hereDisruption at a defence supplier has consequences well beyond lost revenue. ISO 22301 requires business impact analysis on critical production lines, tested recovery plans for single-source components and alternate site arrangements, which is exactly what programme offices ask for during supply chain risk reviews. It also supports readiness obligations where delivery schedules are tied to operational timelines.Typical trigger: Supply chain risk review
ISO 37001
Anti-Bribery Management System
Management SystemOpen full page →
Why it applies hereDefence procurement is among the most corruption-exposed sectors globally, with agents, offsets and intermediaries all creating exposure. ISO 37001 puts third-party due diligence, gifts and hospitality controls and a protected reporting channel in place, and gives the board a certified answer when a tender asks how bribery risk is managed. It is increasingly expected in international bids and joint ventures.Typical trigger: Agent due diligence; international bids
ISO 37301
Compliance Management System
Management SystemOpen full page →
Why it applies hereDefence suppliers sit under export control law, industrial security rules, offset obligations and procurement regulation at the same time. ISO 37301 pulls these into a single compliance management system with an obligations register, assigned control owners and periodic evaluation, so gaps surface internally rather than during a government audit.Typical trigger: Export control; regulatory audit readiness
ISO 28000
Supply Chain Security Management
Management SystemOpen full page →
Why it applies hereDefence supply chains face counterfeit parts, diversion and tampering in transit. ISO 28000 requires threat assessment across the movement of goods, controls over transporters and storage, and verification of upstream suppliers. This addresses the anti-counterfeit and chain-of-custody clauses that now appear routinely in defence procurement contracts.Typical trigger: Anti-counterfeit and chain-of-custody clauses
ISO 55001
Asset Management System
Management SystemOpen full page →
Why it applies hereDefence assets such as test ranges, dry docks, machine tools and vehicle fleets are capital-heavy with decades-long life. ISO 55001 links maintenance, renewal and investment decisions to whole-life cost and operational availability, which is how defence organisations justify sustainment budgets and avoid unplanned downtime on single-capability facilities.Typical trigger: Sustainment budgeting; availability contracts

Cyber Security Solutions

3
VAPT
Vulnerability Assessment & Penetration Testing
Cyber Security SolutionsOpen full page →
Why it applies hereBefore a defence network, avionics interface or ground control application goes live, the customer wants proof it has been attacked under controlled conditions. VAPT delivers authenticated testing of applications, networks and devices against known and emerging exploits, with a prioritised remediation report and retest. Many defence contracts now require testing at each major release, not only at handover.Typical trigger: Pre-go-live security clearance
Cyber Security
Cyber security assessment & certification
Cyber Security SolutionsOpen full page →
Why it applies hereBeyond a one-off test, defence buyers want evidence of continuous security posture: monitoring, patch discipline, secure configuration and staff awareness. A cyber security assessment benchmarks the organisation against recognised control frameworks and produces a remediation roadmap the customer can review. It is often the precondition for connecting a contractor system to a defence network.Typical trigger: Network connection approval
CMMI
Capability Maturity Model Integration appraisal
Cyber Security SolutionsOpen full page →
Why it applies hereDefence software such as mission systems, simulators and C4ISR is contracted on the maturity of the development process. A CMMI appraisal rates requirements management, verification, configuration management and project monitoring. Specific maturity levels are written into defence software tenders as a pass or fail criterion, particularly on international programmes.Typical trigger: Software tender eligibility

Product, Regulatory & Compliance Audit

1
CE Marking
EU product conformity marking
Product, Regulatory & Compliance AuditOpen full page →
Why it applies hereDefence-adjacent products sold into or through Europe, including protective equipment, optics, communications hardware and vehicles, require CE marking under the applicable directives. The process establishes the conformity assessment route, technical file and declaration of conformity, without which customs clearance and European distributor agreements will not proceed.Typical trigger: EU export; distributor agreements
Most requested combination

Integrated Management System - ISO 9001 + ISO 14001 + ISO 45001

One integrated audit instead of three separate ones. Shared documentation, fewer audit days, lower total cost, and the exact trio that tenders and corporate buyers ask defence industry suppliers for.

Get IMS Combo Quote →

Not Sure Which Certification You Need?

Three questions. The selector reads the same industry-to-standard mapping this whole site is built on, then shortlists what applies to you.

Question 2 of 3

What has put certification on the table right now?

Sector: Defence Industry

Before the prime contractor sends its own auditor

An auditor picks one serial number off a despatch note and asks what drawing revision it was built to. How long that answer takes is the readiness score, and a scoping call is where we find out.

Get My Free Quote →

What Certification Changes for Defence Industry Businesses

Certification is not a certificate on the wall. It is a working system that pays for itself.

📋

Clear pre-qualification screening

Procurement portals reject uncertified bidders before anyone opens the technical proposal. A current certificate keeps the bid inside the evaluation pile instead of the rejection log.

🔐

Hold controlled information

Facility security assessments ask how access, cryptography and supplier vetting are managed. A certified information security system gives a documented answer instead of a written assurance.

🧩

Flow requirements down the chain

Customer clauses reach tier two and tier three only if someone controls them. Certification forces the purchase order language, audit rights and part traceability that make flow-down real.

⚠️

Fewer stop-work incidents

A single explosives or confined-space incident halts a line and invites regulatory attention. Hazard control and permit discipline cut both the frequency and the recovery time.

🌍

Bid outside the home market

International programmes ask about bribery controls, export discipline and software maturity in the same questionnaire. Certified systems let a mid-size supplier answer at the same level as a prime.

🔧

Keep single-capability plant running

Test ranges, dry docks and large machine tools have no standby. Asset and continuity disciplines turn unplanned failure into planned renewal that finance can budget for.

Knowledge Base - Downloads

Practical documents prepared by our auditors. Fill the short form once and every download on the page unlocks.

CHECKLIST

Defence tender pre-qualification document checklist

The certificates, scope statements and evidence packs procurement portals ask for, with the format errors that most often get a bid returned.

PDF GUIDE

Holding controlled data on a contractor network

How access control, network separation and supplier vetting are assessed before a contractor system is allowed to connect to a customer network.

TEMPLATE

Supplier flow-down clause and audit template

Purchase order language, audit rights and record retention terms for pushing customer quality and security requirements to tier two suppliers.

WHITEPAPER

Counterfeit parts and chain of custody

Where diversion and substitution enter a defence supply chain, and the verification controls buyers now write into procurement contracts.

🔒 Documents are locked. Fill the form once to unlock every download.

Frequently Asked Questions

Straight answers to what buyers ask before they commit to certification.

Is ISO 9001 enough, or do we need a defence-specific quality standard?
ISO 9001 is the base layer, not the whole answer. Aerospace and defence schemes add configuration management, first-article inspection, counterfeit part control and key characteristic requirements on top of it. Building ISO 9001 properly first makes the sector standard a shorter step rather than a rebuild, and many subcontract packages accept ISO 9001 on its own.
Can you audit a site where parts of the facility are access-restricted?
Yes. Restricted-area access is agreed during the proposal stage, and audits are routinely run with escorted access, sampled evidence brought to a cleared room, or scope boundaries drawn around areas the auditor cannot enter. What matters is that the sample still supports a conclusion. Tell us the constraints early so the audit plan is built around them.
Our prime contractor gave us ninety days. Is that realistic?
For a single site with an existing quality system, yes. Application, gap review, Stage 1 and Stage 2 typically run six to ten weeks, and the certificate follows the closure of any major non-conformities. The risk is not audit availability, it is unclosed corrective actions. Start the gap review immediately rather than waiting until documentation feels finished.
We already ran a penetration test. Do we still need ISO/IEC 27001?
A penetration test is a snapshot; ISO/IEC 27001 is the system that keeps the findings from coming back. Customers connecting a contractor system to a defence network usually want both: certified governance covering access, cryptography, supplier security and incident response, plus current test evidence against the applications and devices in scope. Many contracts now require retesting at each major release.
Does SIS help us prepare the documentation as well as audit it?
No, and that separation is what makes the certificate worth holding. Accreditation rules bar a certification body from consulting on the system it later audits. SIS assesses and certifies; a consultant or your own team prepares. If an auditor writes your procedures, the certificate becomes unverifiable during customer due diligence and buyers know to check for it.
How long does the certificate last and what happens in between?
Three years, with an annual surveillance audit in each intervening year and a recertification audit before expiry. Surveillance samples the areas most likely to drift: corrective action closure, internal audit coverage, changes to the production line and any new contracts brought into scope. Missing a surveillance window suspends the certificate, and suspension is visible to customers verifying it.

Talk to an auditor who knows defence work

Auditors who have walked a bonded store and a test range do not need the process explained to them. Say which contract is driving the requirement and the audit is planned around your production schedule.

Get My Free Quote → WhatsApp Us
✉ Email Us
✉ EmailGet Quote